Toughened PA6 for Repeated Bending and Impact
Impact Modified Nylon Molding Compound is a modified PA6 engineering plastic designed to improve toughness under impact, bending, and changing temperature conditions.
Unlike reinforced nylon grades that focus more on stiffness and load-bearing capacity, this material places greater emphasis on impact resistance, low-temperature performance, bending durability, and easy molding.
Typical applications include cable ties, pulleys, sports equipment parts, mechanical gears, and textile accessories. These products may experience repeated movement, sudden impact, local bending, or changing mechanical loads during use.
For parts where excessive stiffness may increase the risk of cracking, toughened PA6 provides a different balance between flexibility and structural performance.
High Elongation and Impact Resistance
Representative grades in this series have a density of 1.03–1.09 g/cm³. Tensile strength at break ranges from 35 to 60 MPa, while elongation at break reaches 32%–80%.
Notched Izod impact strength is 50–100 kJ/m². The relatively high elongation and impact strength provide more deformation capacity when molded parts are exposed to sudden loads or localized stress.
Flexural strength ranges from 49 to 71 MPa, and flexural modulus is 1080–1700 MPa. This performance profile allows Impact Modified Nylon Molding Compound to provide a useful balance between toughness, flexibility, and basic structural strength.
Selection Should Follow the Finished Part
Different products require different priorities.
For cable ties, buyers should pay attention to bending performance, complete molding of the locking structure, and compatibility between the material and the fastening design.
For pulleys and mechanical gears, load, friction conditions, dimensional accuracy, and operating temperature should be considered. Sports equipment parts may require additional attention to impact direction, wall thickness, and connection structures.
The typical molding shrinkage range is 0.25%–1.30%. Because the range differs between grades, the exact grade should be selected according to mold dimensions and finished-part tolerances. Purchasing only on the basis of a general "high toughness" description may not provide enough information for stable production.
Technical Support for Toughness-Oriented Applications
Diyou New Material has long-term experience in formulation and production of modified engineering plastics. Its technical capabilities cover material selection, formulation design, process optimization, and performance verification.
For toughened PA6, material recommendations can be made according to bending requirements, impact conditions, part structure, and injection molding equipment.
Injection molding verification can also be used to observe the processing behavior of the selected grade before volume production.
During production, raw materials, extrusion parameters, and finished-product properties are controlled through defined procedures. This supports more consistent toughness, flow, and molding behavior between production batches.
For customers considering Impact Modified Nylon Molding Compound, providing information about the actual part and working conditions can make grade selection more accurate and reduce unnecessary trial adjustments.
Product Specifications
|
Parameter |
Specification |
|
Material Type |
Impact Modified PA6 |
|
Typical Density |
1.03–1.09 g/cm³ |
|
Elongation at Break |
32%–80% |
|
Notched Izod Impact Strength |
50–100 kJ/m² |
|
Molding Shrinkage |
0.25%–1.30% |
Hot Tags: impact modified nylon molding compound, China impact modified nylon molding compound manufacturers, suppliers, factory
